BLACK FRIDAY EARLY BIRD · FILAMENT & PRINTER DEALS
← ALL 3D PRINTERS

Bambu Lab H3C

Nine-tool multi-material printing with integrated AMS 3H

$2,199.00 $2,499.00
Black Friday Early Bird · 12% OFF · SAVE $300.00
330 × 320 × 325 mmBUILD VOLUME
ProfessionalPRODUCT CLASS

Print flexible hinges, rigid bodies and dedicated support interfaces in one job using independently loaded tools. The heated build chamber supports demanding engineering materials, and the integrated AMS 3H handles storage, feeding and drying.

QUANTITY1

What the H3C can do

Switch materials mid-print, print flexible parts, and dry filament during a build.

The H3C filament feed paths and tool rack

9 material paths

Nine PrintTools keep their own filament loaded and heated, reducing the need to purge material between tool changes.

Detail of the H3C SwapTek tool rack

6-second switching

SwapTek can switch materials in as little as six seconds with active preheating. Bambu Lab reports a 3.4-second mechanical tool change under its test conditions.

A curved example TPU print beside the H3C

Ultra-soft TPU

FlexFeed handles compatible TPU as soft as 75A. Bambu Lab reports up to 3× the flow rate of a conventional printer with its specified setup.

The H3C’s enclosed AMS 3H spool compartment

Enclosed filament system

The integrated AMS 3H houses filament spools under a closed lid and feeds material automatically to the printer.

An H3C next to examples of printing, cutting, drawing and debossing

Multi-process ready

Use compatible tools for printing, cutting, drawing and debossing. Crafting attachments and availability depend on the tooling.

A frontal view of the H3C build chamber and print bed

Large build volume

A 330 × 320 × 325 mm build area gives you room for larger parts and multi-part batches.

The H3C enclosed build chamber under warm studio lighting

Active chamber control

Dual-zone active heating raises the enclosed chamber to up to 65 °C. Heating and cooling control help manage demanding engineering materials.

Rear detail of the H3C and integrated AMS 3H

Built-in drying

Two dedicated AMS 3H slots dry compatible filament at up to 85 °C, including during a print.

Technical specifications

Build volume (W × D × H)
330 × 320 × 325 mm
Nozzle maximum
350 °C
Bed maximum
120 °C
Active chamber
Up to 65 °C
Filament diameter
1.75 mm and 2.85 mm via FlexFeed
Supported nozzle diameters
0.2, 0.4, 0.6 and 0.8 mm
Toolhead travel
Up to 1,400 mm/s
Acceleration
Up to 25,000 mm/s²
Filament drying
Two dedicated AMS 3H slots, up to 85 °C
Filtration
H11 HEPA
Dimensions
493 × 571 × 587 mm
Weight
36.28 kg with AMS 3H
Supported material families
PLA, PETG, PCTG, TPU, EVA, PE, PP, PHA, PVA, BVOH, ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS and approved fiber-filled grades
BLACK FRIDAY EARLY BIRD · FILAMENT & PRINTER DEALS · SHOP FILAMENTS →